Air Filters
  Chains & Sprockets
  Fluids & Lubricants
  Foot Controls
  Frame & Bar Sliders
  Fuel Management
  Hand Controls
  Suspension & Dampers
  Back Protection/Sliders, Etc
  Leather Jackets/Pants
  Leather Suits
  Textile Jackets/Pants
  Rain Gear
  Tire Warmers
  Body Work & Undertails
  Carbon Fiber
  Communication, Video, Etc
  Covers & Tankpads
  Electrical & Lights
  Front & Rear Stands, Spools
  Timing Equipment
   Gift Certiifcates
  Gift Certificates
 Bel-Ray Brake Fluid Silicone DOT5
  Your Savings:
  Moto World's Price:

Point on the Image for a Detailed View
Comes in 12 Oz bottles / 12 per case

Bel-Ray Silicone DOT 5 Brake Fluid is for all applications specifying DOT 5 silicone type brake fluid. It exceeds FMVSS 116 specification. When maximum performance is needed, Bel-Ray Silicone DOT 5 Brake Fluid provides superior fade-free brake performance under the most demanding high- and low temperature extremes.


  • When DOT 5 product is specified for hydraulic brake systems.
  • For consistent “feel” and long lasting superior brake performance such as racing .

Features and Benefits

  • High boiling point - Eliminates brake fade for superior performance.
  • Non-water absorbing - Will not attract water that can lower the boiling point of the fluid. When boiling occurs, the compressibility of the fluid is greatly reduced, leading to brake fade or possible braking failure. No water contamination results in no loss in braking power.
  • Better lubrication - Offers superior lubrication of master cylinder and brake pistons preventing the possible severe abrasion between the sealing cups and pistons that can take place when under pressure. Ensures optimum sealing against leaks or pressure loss for consistent brake “feel” and performance.
  • Corrosion protection - Lack of moisture absorption minimizes rust and corrosion for better sealing and longer component life.
  • User friendly - Will not affect plastic or painted surfaces. Non-toxic, non-corrosive and non-irritating.

General Description

    Bel-Ray Silicone DOT 5 Brake Fluid is specially formulated to exceed all DOT 5 specifications for superior brake performance. It is compatible with all DOT 5 type products and has outstanding high- and low temperature properties for consistent and fade-free braking performance. Bel-Ray DOT 5 will not absorb water and is non-corrosive and non-toxic. It will not affect painted surfaces and other materials.

Application Instructions

    For best results drain and replace the brake fluid once a year. Flush and refill with fresh Bel-Ray Silicone DOT 5 Brake Fluid. Bleed the hydraulic system as recommended by the manufacturer. Check and replace damaged seals and dust protectors if needed. Dispose of empty container in a responsible manner.

Caution: Do not mix with DOT 3 or DOT 4 type brake fluids which are incompatible with DOT 5. Store in a cool and dry environment. Always wear safety glasses when using this product. Keep container away from heat and tightly closed to prevent moisture absorption.

Email this page to a friend

Be the first to review this item
Copyright Moto World, Inc. All Rights Reserved. eCommerce Software by 3dcart.